GF Signet 3-9950-1 AC or DC Dual Channel Transmitter 3-9950-1
GF Signet 3-9950-1 AC or DC Two Channel Multi-Parameter Inputs, Two 4 to 20 mA Outputs, Panel Mount
The 9950 Transmitter is a two channel controller that can support two sensors of same or diff erent types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure
The 9950 Transmitter is a two channel controller that can support two sensors of same or diff erent types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® Signal Converter.
The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived functions allows for the control of a relay or current loop with the sum, delta (diff erence), or ratio of two measurements, for example delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay. This can be any combination of analog and binary inputs. The timer relay modes allow relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be turned on on a specifi c day or days of the week at a specifi c time. The 3-9950.393-3 Relay Module includes the ability to interface up to four binary inputs. The binary inputs are compatible with either open collector or mechanical contacts. The binary inputs can supply power to the four inputs or accepts powered outputs from external devices. These inputs can be used with level switches, fl ow switches, pressure switches or other devices. The inputs can be used to directly control the relays of the 9950 or can be used in combination with the measurement readings for advanced control of your process.
- Four Channel Mechanical Relay Module
- Two Mechanical and Two Solid State Relay Module
- Two Mechanical Relays and Four Binary Inputs Module
- One instrument for multiple sensor types
- Two diff erent sensor types can be combined in one unit
- Confi gurable display
- Derived measurements
- Advanced boolean logic
- Optional modules can be added for additional capabilities
- USB Port for Field Upgrades using standard USB Flash Drive
- Wastewater Treatment
- Reverse Osmosis
- Deionization
- Chemical Manufacturing / Addition
- Metal and Plastic Finishing
- Fume Scrubber
- Cooling Tower
- Media Filtration
- Chemical Dosing/ Injection
- Aquatic Life Support
- Pools & Fountains
- Rinse Tanks
- Chemical Neutralization
| Input Channels | Two frequency or S3L inputs |
|---|---|
| Case Material | PBT |
| Window | Shatter-resistant glass |
| Keypad | 4 Buttons, injection-molded silicone rubber seal |
| Display | Dot matrix, LCD |
| Indicators | Two horizontal digital bar graphs, four LED relay status indicators |
| Update Rate | 1s |
| LCD Contrast | 5 settings |
| Size | 1/4DN |
| Mounting - Panel | 1/4 DIN, ribbed on four sides for panel mounting clip inside panel, silicon gasket included |
| Mounting - Wall | Large enclosure (sold as an accessory) |
| Pluggable Screw Type | Use minimum 105 °C rated wire |
| Torque Ratings - Power/Loop | 0.49 Nm (4.4 lb-in.) |
| Torque Ratings - Freq/S3L | 0.49 Nm (4.4 lb-in.) |
| Torque Ratings - Relay Module | 0.49 Nm (4.4 lb-in.) |
