GF Signet 3-2536-T0 Rotor-X Flow Sensor 3-2536-T0
highly reliable GF Signet Rotor-X Paddlewheel Flow Sensors With Operating Range (0.3 to 20 ft/s)
GF Signet 3-2536-T0 Paddlewheel Flow Sensors with Sensor Body Glass-filled PP (black) or PVDF (natural), Body/Rotor/Pin material Natural PVDF/Natural PVDF/Natural PVDF , Pipe size 0.5 to 4 in. and Highly repeatable output.
It is simple to install with time-honored reliable performance, Signet 2536 Rotor-X Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The Model 2536 has a process-ready open collector signal with a wide dynamic flow range of 0.1 to 6 m/s (0.3 to 20 ft/s). The sensor measures liquid flow rates in full pipes and can be used in low pressure systems.
The Signet 2536 Rotor-X Paddlewheel Flow Sensors are offered in a variety of materials for a wide range of pipe sizes and insertion configurations. The many material choices, including PP and PVDF, make this model highly versatile and chemically-compatible with many liquid process solutions. Sensors can be installed in DN15 to DN900 (½ to 36 in.) pipes using Signet's comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weldolets, seat the sensor to the proper insertion depth into the process flow. The sensors are also offered in configurations for wet-tap installation requirements.
- Pure Water Production
- Filtration Systems
- Chemical Production
- Liquid Delivery Systems
- Pump Protection
- Scrubber Systems
- Water Monitoring
- Not suitable for gases
- Operating range 0.1 to 6 m/s (0.3 to 20 ft/s)
- Wide turndown ratio of 66:1
- Open-collector output
- Installs into pipe sizes DN15 to DN900 (½ to 36 in.)
- High resolution and noise immunity
- Highly repeatable output
- Test certificate included for -X0, -X1
- Chemically-resistant materials
- CE
- FCC
- China RoHS
- RoHS compliant
- NSF (3-2536-PX version only)
| Operating Range | 0.1 to 6 m/s (0.3 to 20 ft/s) |
|---|---|
| Pipe Size Range | DN15 to DN900 (½ to 36 in.) |
| Linearity | ±1% of max. range @ 25 °C (77 °F) |
| Repeatability | ±0.5% of max. range @ 25 °C (77 °F) |
| Min. Reynolds Number Required | 4500 |
| Sensor Body | Glass-filled PP (black) or PVDF (natural) |
| O-rings | FPM (std) optional EPR (EPDM) or FFPM |
| Rotor Pin | Titanium, Hastelloy-C or PVDF; optional Ceramic, Tantalum or Stainless Steel |
| Rotor | Black PVDF or Natural PVDF; optional ETFE, with or w/o carbon fiber reinforced PTFE sleeve for rotor pin |
| Frequency | 49 Hz per m/s nominal (15 Hz per ft/s nominal) |
| Supply Voltage | 5 to 24 VDC ±10%, regulated |
| Supply Current | <1.5 mA @ 3.3 to 6 VDC (<20 mA @ 6 to 24 VDC) |
| Output Type | Open collector, sinking 10 mA max. |
| Cable Type | 2-conductor twisted pair with shield, 22 AWG |
| Cable Length | 7.6 m (25 ft) can be extended up to 305 m (1000 ft) maximum |
| Max. Temperature/Pressure Rating - Standard and Integral Sensor (PP) | 12.5 bar @ 20 °C (180 psi @ 68 °F), 1.7 bar @ 85 °C (25 psi @185°F) |
| Max. Temperature/Pressure Rating - Standard and Integral Sensor (PVDF) | 14 bar @ 20 °C (200 psi @ 68 °F), 1.7 bar @ 85 °C (25 psi @ 185 °F) |
| Operating Temperature (PP) | -18 °C to 85 °C / 0 °F to 185 °F |
| Operating Temperature (PVDF) | -18 °C to 85 °C / 0 °F to 185 °F |
| Max. Temperature/Pressure Rating - Wet-Tap Sensor (PP) | 7 bar @ 20 °C (100 psi @ 68 °F), 1.4 bar @ 66 °C (20 psi @ 150 °F) |
| Operating Temperature | -18 °C to 66 °C 0 °F to 150 °F |
| Max. Wet-Tap Sensor Removal Rating | 1.7 bar @ 22 °C 25 psi @ 72 °F |
| Standards and Approvals | CE, FCC, RoHS compliant, China RoHS |
